matab-panel/scripts/install.bat

@echo off
setlocal EnableDelayedExpansion
set "SCRIPTS=%~dp0"
set "SCRIPTS=!SCRIPTS:~0,-1!"
for %%F in ("!SCRIPTS!\..")  do set "PROJECT_DIR=%%~fF"
set "WINSW=!SCRIPTS!\WinSW-x64.exe"

net session >nul 2>&1
if %errorlevel% neq 0 (
    echo [ERROR] Run as Administrator!
    pause & exit /b 1
)

echo =============================================
echo    MatabPanel - Install Services
echo =============================================
echo.
echo Scripts : !SCRIPTS!
echo Project : !PROJECT_DIR!
echo.

if not exist "!WINSW!" (
    echo [ERROR] WinSW-x64.exe not found in scripts folder.
    pause & exit /b 1
)

if not exist "!SCRIPTS!\nginx\nginx.exe" (
    echo [ERROR] nginx not found in scripts\nginx\
    pause & exit /b 1
)

if not exist "!SCRIPTS!\php\php-cgi.exe" (
    echo [ERROR] php-cgi.exe not found in scripts\php\
    pause & exit /b 1
)

REM --- [1/7] Clear bootstrap cache + OPcache file cache ---
echo [1/7] Clearing bootstrap cache and OPcache...
cd /d "!PROJECT_DIR!"
if exist "bootstrap\cache\config.php"       del /F /Q "bootstrap\cache\config.php"       >nul 2>&1
if exist "bootstrap\cache\routes-v7.php"    del /F /Q "bootstrap\cache\routes-v7.php"    >nul 2>&1
if exist "bootstrap\cache\services.php"     del /F /Q "bootstrap\cache\services.php"     >nul 2>&1
if exist "bootstrap\cache\packages.php"     del /F /Q "bootstrap\cache\packages.php"     >nul 2>&1
if exist "bootstrap\cache\events.php"       del /F /Q "bootstrap\cache\events.php"       >nul 2>&1
if exist "bootstrap\cache\blade-icons.php"  del /F /Q "bootstrap\cache\blade-icons.php"  >nul 2>&1
if exist "bootstrap\cache\filament"         rmdir /S /Q "bootstrap\cache\filament"       >nul 2>&1
REM Clear compiled Blade views (storage/framework/views/*.php)
for %%f in ("storage\framework\views\*.php") do del /F /Q "%%f" >nul 2>&1
REM Clear OPcache file cache from disk (opcache.file_cache=C:/tmp/php-opcache in php.ini)
REM Without this, php-cgi reads stale bytecode after restart since validate_timestamps=0
if exist "C:\tmp\php-opcache"               rmdir /S /Q "C:\tmp\php-opcache"             >nul 2>&1
echo [OK] Done.
echo.

REM --- [2/7] storage:link ---
echo [2/7] Creating storage link...
"!SCRIPTS!\php\php.exe" artisan storage:link >nul 2>&1
echo [OK] Done.
echo.

REM --- [3/7] Optimize Laravel ---
echo [3/7] Optimizing Laravel...
"!SCRIPTS!\php\php.exe" artisan optimize:clear --quiet 2>nul
"!SCRIPTS!\php\php.exe" artisan optimize --quiet 2>nul
"!SCRIPTS!\php\php.exe" artisan filament:optimize --quiet 2>nul
echo [OK] Done.
echo.

REM --- [4/7] Configure OPcache ---
echo [4/7] Configuring OPcache...
if not exist "C:\tmp\php-opcache" mkdir "C:\tmp\php-opcache"
set "SCRIPTS_BAK=!SCRIPTS!"
powershell -NoProfile -Command ^
    "$s='!SCRIPTS_BAK!'; $action=New-ScheduledTaskAction -Execute 'cmd.exe' -Argument ('/c \"\"' + $s + '\warmup.bat\"\"'); $trigger=New-ScheduledTaskTrigger -AtStartup; $settings=New-ScheduledTaskSettingsSet -ExecutionTimeLimit (New-TimeSpan -Minutes 5) -MultipleInstances IgnoreNew; Unregister-ScheduledTask -TaskName 'MatabWarmup' -Confirm:$false -ErrorAction SilentlyContinue; Register-ScheduledTask -TaskName 'MatabWarmup' -Action $action -Trigger $trigger -Settings $settings -RunLevel Highest -User 'SYSTEM' -Force | Out-Null; Write-Host '  Warmup task registered.'"
echo [OK] Done.
echo.

REM --- [5/7] Generate nginx.conf from template ---
echo [5/7] Writing nginx.conf...
set "PUBLIC_DIR=!PROJECT_DIR:\=/!/public"
if not exist "!SCRIPTS!\nginx\conf\nginx.conf.template" (
    echo [ERROR] nginx.conf.template not found in scripts\nginx\conf\
    pause & exit /b 1
)
powershell -NoProfile -Command ^
    "(Get-Content '!SCRIPTS!\nginx\conf\nginx.conf.template') -replace '\{\{PUBLIC_DIR\}\}', '!PUBLIC_DIR!' | Set-Content '!SCRIPTS!\nginx\conf\nginx.conf'"
echo [OK] nginx.conf written.
echo.

REM --- [6/7] Firewall ---
echo [6/7] Firewall rules...
netsh advfirewall firewall delete rule name="Matab Web 8000"     >nul 2>&1
netsh advfirewall firewall delete rule name="Matab FTP 2121"     >nul 2>&1
netsh advfirewall firewall delete rule name="Matab FTP Passive"  >nul 2>&1
netsh advfirewall firewall delete rule name="Matab Ping"         >nul 2>&1
netsh advfirewall firewall add    rule name="Matab Web 8000"     dir=in action=allow protocol=TCP localport=8000        >nul
netsh advfirewall firewall add    rule name="Matab FTP 2121"     dir=in action=allow protocol=TCP localport=2121        >nul
netsh advfirewall firewall add    rule name="Matab FTP Passive"  dir=in action=allow protocol=TCP localport=60000-60020 >nul
netsh advfirewall firewall add    rule name="Matab Ping"         dir=in action=allow protocol=icmpv4:8,any              >nul
echo [OK] Done.
echo.

REM --- [7/7] Windows Services ---
echo [7/7] Installing Windows services...

echo   Stopping old services...
"!WINSW!" stop      "!SCRIPTS!\matab-autostart.xml" >nul 2>&1
"!WINSW!" stop      "!SCRIPTS!\matab-phpcgi.xml"    >nul 2>&1
"!WINSW!" stop      "!SCRIPTS!\matab-ftp.xml"       >nul 2>&1
"!WINSW!" uninstall "!SCRIPTS!\matab-autostart.xml" >nul 2>&1
"!WINSW!" uninstall "!SCRIPTS!\matab-phpcgi.xml"    >nul 2>&1
"!WINSW!" uninstall "!SCRIPTS!\matab-ftp.xml"       >nul 2>&1
taskkill /f /im nginx.exe   >nul 2>&1
taskkill /f /im php-cgi.exe >nul 2>&1
taskkill /f /im php.exe     >nul 2>&1

echo   Installing FTP service...
"!WINSW!" install "!SCRIPTS!\matab-ftp.xml"
"!WINSW!" start   "!SCRIPTS!\matab-ftp.xml"
echo.

echo   Installing PHP FastCGI service...
"!WINSW!" install "!SCRIPTS!\matab-phpcgi.xml"
"!WINSW!" start   "!SCRIPTS!\matab-phpcgi.xml"
echo.

echo   Installing nginx service...
"!WINSW!" install "!SCRIPTS!\matab-autostart.xml"
"!WINSW!" start   "!SCRIPTS!\matab-autostart.xml"
echo.

echo Waiting for web server on port 8000...
powershell -NoProfile -Command ^
    "$ok=0; for($i=0;$i -lt 60;$i++){try{$t=New-Object Net.Sockets.TcpClient;$t.Connect('127.0.0.1',8000);$t.Close();$ok=1;break}catch{Start-Sleep -Milliseconds 500}}; if($ok){Write-Host '[OK] Server is ready.'}else{Write-Host '[WARN] Server did not respond in 30s.'}"

echo.
echo =============================================
echo  Services installed (auto-start with Windows):
echo    MatabFTP       - FTP server   (port 2121)
echo    MatabPHPCgi    - PHP FastCGI  (port 9001)
echo    MatabAutostart - nginx        (port 8000)
echo.
echo  Web: http://localhost:8000
echo =============================================
echo.
pause